Our most powerful two speed mag drill for heavy duty fabrication.
• Large 2-3/8" x 3" capacity
• Our most powerful high torque motor
• Two Speed gear box - 250 & 450 RPM
• Pilot light - for low light or no light conditions
• Two stage magnet - 30% increase in power when
motor is turned on
• Positive slug ejection
• Integrated coolant bottle
• Many accessories are available for a
portable machine shop including: drill
chucks, tapping, countersink, and more...
• Feed handles quickly change from side to side
• Lift detector safety system
• Rear mounted controls
• Carrying case included
• One year warranty
Swivel Base adds even greater versatility: • Precisely line up your pilot with the holes
• One stroke lock and unlock handle
• Great for horizontal, overhead, tight areas,
and getting out over another piece of steel
Easily installs in a Hougen Magnetic Drill* without removing drill arbor and coolant system. Adapter accepts a modified 118° twist drill with a 1/4" flatted shank that secures in adapter with a set screw. A convenient kit is available containing all items listed below.
Twist Drill Adapter with Set Screw
Set Screw for Adapter
1/2" dia. Twist Drill
7/16" dia. Twist Drill
3/8" dia. Twist Drill
5/16" dia. Twist Drill
1/4" dia. Twist Drill
Twist Drill Adapter Kit
#2 Morse Taper Adapter
#2 Morse Taper Adapter easily fits on the HMD917 to accept morse taper shank twist drills or reamers. Will work with up to 7/8" dia twist drills or reamers with a max length of 10.25".
Part No. 07448
Lightweight, easy to install design incorporates a planetary gear reverse with a 1:1 ratio. Reversing speed is equal to spindle speed so in-feed and out-feed of the unit can be employed without reversing motor direction.
Designed for use with Hougen Magnetic Drills, 82° Countersink is double fluted with carbide inserts for maximum cutting action and long life. For holes from 9/16" to 15/16" diameters.
82° Countersink Kit InDesign countersink with inserts & (4) Pilots - 9/16, 11/16, 13/16 & 15/16" plus a torx wrench
82° Countersink with Carbide Inserts (Does not include pilots)
9/16" diameter Pilot
11/16" diameter Pilot
13/16" diameter Pilot
15/16" diameter Pilot
Replacement Carbide Inserts (Box of 10)
Use for mild steel, cast steel & malleable iron
Replacement Carbide Inserts Wear Resistant (Box of 10) Use for structural steel, stainless steel, harder steels & non-ferrous materials
Pipe Adapter Kits
These kits let you drill pipe and tubing with a minimum 3" diameter and some convex surfaces. Kits quickly attach to your Hougen Magnetic Drill and positive non-slip positioning assures centered hole location.
RotaMagic Super Concentrated Cutting Fluid is water soluble, biodegradable cutting lubricant that yields a 10:1 ratio when mixed with water. RotaMagic extends tool life and improves cutter performance.
1 Pint Bottle
(12) 1 Pint Bottles
1 Gallon Bottle
(4) 1 Gallon Bottles, makes 11 gallons each
(1) 5 Gallon Pail, makes 55 gallons
(1) 55 Gallon Drum, makes a lot of coolant!
* Individual Products Not for Distributor Purchase
RotaFoam Cutting Fluid is an extremely heavy-duty, high performance foamy lubricant for all types of metals and metal working applications. "Super Sticky" properties make the foam adhere to the metal and stay on longer. The blue colored foam allows you to "See Where You Spray" and also assures thorough coverage. Use with annular cutters, taps, drills, reamers, endmills, & more.( Only Available in the US & Canada)
Single 17oz Can
Case of 12 cans
* Individual Can Not for Distributor Purchase
Slick-StikLubricant is softer than other stick lubricants for easy application, providing superior adhesion to the tool, assuring thorough coverage. Use with ferrous and non-ferrous materials. Can be used with all Hougen cutters including "12,000-Series" Cutters for horizontal or overhead drilling.