Hougen Manufacturing, Inc. Electro-Hydraulic Hole PunchersAnnular CuttersMagnetic Drills Contact Us

 

 

Hougen is part of the GSA GS-21F-035CA


Help Us Improve!

Product Survey


Customer Service Survey



HMD934

Industrial four speed, 4" depth mag drill for heavy duty metal fabrication


• Powerful motor with two speed gear box
• Interchangeable gears for up to four speeds
• Uses Hougen "12,000-Series" Annular Cutters
• Pilot Light for low light conditions
• Two stage magnet
• Positive slug ejection
• Coolant bottle included - optional pressurized
  system
• More holding power with impactor points
• Lift detector safety system
• Minimal maintenance requirements
• Integrated motor/gearbox design with guide rails for
  a rigid compact design
• One year warranty

Replaces HMD915 & HMD933


Optional gearing available for the following cutter RPM: 70, 120, 200, 332
See Chart Below

 

Four speed HMD934 Industrial Magnetic Drill for holes up to 4" deep
The HMD934 magnetic drill is made in uSA

 

 

HMD934 SPECIFICATIONS
Electrical System 115V, 50/60 Hz - 13.5A, 1553W
230V, 50/60 Hz - 6.75A, 1553W

Motor 12.5A (115V), 6.25A (230V) 70/120/200/332 RPM

Diameter 5/8"- 3-1/16" (16mm - 77mm)

Depth 4" (100mm)

Cutter/Mount "12,000-Series" - 3/4" shank

Dimensions 26-1/4" H x 10" W x 17-3/4" L
(667mm H x 254mm W x 451mm L)

Magnet Base 5" W x 7" L (127mm W x 178mm L)
1" Plate (25mm) Dead Lift
2745 lb. (1245 kg)
Drillpoint Breakaway
1492 lb. (676 kg)
3/8" Plate (9.5mm) 1153 lb. (522 kg) 627 lb. (284 kg)

Weight 72 lb. (32.6 kg) • Shipping 94 lb (42.6 kg)

Shipping Dimensions 15.75 x 22 x 32.25" (40 x 55.9 x 81.9 cm)

 

Models & Part No.
Click on Part No for Op Manual

   

Part No.

Description

Voltage

Special Plug

0934102 HMD934 115V
0934202 HMD934 230V
0934302 HMD934 230V Type I

* All drills include: pint of coolant, hex wrenches, handle & safety chain.

Pressurized Coolant System

Pressurized coolant system for the HMD934 provides longer and better coolant flow when drilling holes
Pressurized coolant system allows for extended drilling times and better coolant flow to the cutting teeth deep in the hole. Also works with the the older HMD933 & HMD915 drills.

Part No: 08446

Countersink Kit

Countersink kit for portable magnetic drills makes 82 degree countersinks
Designed for use with Hougen Magnetic Drills, 82° Countersink is double fluted with carbide inserts for maximum cutting action and long life. For holes from 9/16" to 15/16" diameters.
Part No.
Description
12965
82° Countersink Kit includes countersink with inserts & (4) Pilots - 9/16, 11/16, 13/16 & 15/16" plus a torx wrench
12966
82° Countersink with Carbide Inserts (Does not include pilots)
12960
9/16" diameter Pilot
12961
11/16" diameter Pilot
12962
13/16" diameter Pilot
12963
15/16" diameter Pilot
05464
Replacement Screw
05465
Replacement Wrench
05467
Replacement Carbide Inserts (Box of 10)
Use for mild steel, cast steel & malleable iron
05779
Replacement Carbide Inserts Wear Resistant (Box of 10) Use for structural steel, stainless steel, harder steels & non-ferrous materials



Pipe Adapter Kits

Drill holes in pipes with a magnetic drill using the pipe adapter kit
These kits let you drill pipe and tubing with a minimum 3" diameter and some convex surfaces. Kits quickly attach to your Hougen Magnetic Drill and positive non-slip positioning assures centered hole location.
* Minimum 3" diameter schedule 160,
maximum 12" diameter schedule 160


Part No.
Description
02564*
Chain mount pipe adapter (bracket required)
10726
Bracket mount for Models HMD934

 

Slick-Stik Lubricant & RotaMagic Cutting Fluid provides the proper lubrication for annular cutter hole making


RotaMagic
Super Concentrated Cutting Fluid


RotaMagic
Super Concentrated Cutting Fluid is water soluble, biodegradable cutting lubricant that yields a 10:1 ratio when mixed with water. RotaMagic extends tool life and improves cutter performance.

 

 

Part No.
Description
11741*
1 Pint Bottle
11741-12
(12) 1 Pint Bottles
11742*
1 Gallon Bottle
11742-4
(4) 1 Gallon Bottles, makes 11 gallons each
11743
(1) 5 Gallon Pail, makes 55 gallons
11744
(1) 55 Gallon Drum, makes a lot of coolant!
* Individual Products Not for Distributor Purchase

For SDS Information please click here

 

RotaFoam Cutting Fluid for use with drills, annular cutters, taps and reamers

RotaFoam™ Cutting Fluid

RotaFoam Cutting Fluid is an extremely heavy-duty, high performance foamy lubricant for all types of metals and metal working applications. "Super Sticky" properties make the foam adhere to the metal and stay on longer. The blue colored foam allows you to "See Where You Spray" and also assures thorough coverage. Use with annular cutters, taps, drills, reamers, end mills, & more.
(Only Available in US & Canada)

Part No.
Description
11747*
Single 17oz Can
11747-12
Case of 12 cans
* Individual Can Not for Distributor Purchase

Hougen Slick-Stik is a wax based lubricant for use with annular cutters and other cutting tools

Slick-StikLubricant is softer than other stick lubricants for easy application, providing superior adhesion to the tool, assuring thorough coverage. Use with ferrous and non-ferrous materials. Can be used with all Hougen cutters including Rotabroach Cutters for horizontal or overhead drilling.

Slick-Stik™ Lube

Part No.
Description
11745-6
(6) 16 oz. Slick-Stik Lubricant
11746-12
(12) 1.68 oz. Mini Slick-Stik Lubricant

For SDS Information please click here

Gearing Options

Cutter RPM
Part No. (No. Teeth Per Gear)
Shaft A
Shaft B
  Motor High Speed
120
40012 (18)
40016 (30)
332
40016 (30)
40012 (18)
  Motor Low Speed
70
40012 (18)
40016 (30)
200
40016 (30)
40012 (18)

 

 

Coming Soon

 

 


Find a Hougen Dealer in Your Area