Lightweight, powerful, low cost mag drill
for general fabrication.
• Large 1-1/2" x 2" capacity
• Hidden motor cord
• Ergonomic housing
• Increased safety with less maintenance
• Spring slug ejection
• Slot Drive arbor for more accuracy and
quicker change out of accessories
• Many accessories are available for a
portable machine shop including: drill
chucks, countersink, and more...
• Lift detector safety system
• Rear mounted controls
• Two year warranty
Easily use twist drills with an HMD900. Drill chucks are quickly installed in place of the arbor. Spindle adapters are required to use a drill chuck. Part No 09377 includes 1/2" drill chuck and adapter.
Twist Drill Adapter
Easily installs in a Hougen Magnetic Drill* without removing drill arbor and coolant system. Adapter accepts a modified 118° twist drill with a 1/4" flatted shank that secures in adapter with a set screw. A convenient kit is available containing all items listed below.
Part No.
Description
02608
Twist Drill Adapter with Set Screw
02695
Set Screw for Adapter
03835
1/2" dia. Twist Drill
03837
7/16" dia. Twist Drill
03839
3/8" dia. Twist Drill
03841
5/16" dia. Twist Drill
03843
1/4" dia. Twist Drill
03845
Twist Drill Adapter Kit
Countersink Kit
Designed for use with Hougen Magnetic Drills, 82° Countersink is double fluted with carbide inserts for maximum cutting action and long life. For holes from 9/16" to 15/16" diameters.
Part No.
Description
12965
82° Countersink Kit includes countersink with inserts & (4) Pilots - 9/16, 11/16, 13/16 & 15/16" plus a torx wrench
12966
82° Countersink with Carbide Inserts (Does not include pilots)
12960
9/16" diameter Pilot
12961
11/16" diameter Pilot
12962
13/16" diameter Pilot
12963
15/16" diameter Pilot
05464
Replacement Screw
05465
Replacement Wrench
05467
Replacement Carbide Inserts (Box of 10)
Use for mild steel, cast steel & malleable iron
05779
Replacement Carbide Inserts Wear Resistant (Box of 10) Use for structural steel, stainless steel, harder steels & non-ferrous materials
Pipe Adapter Kits
These kits let you drill pipe and tubing with a minimum 3" diameter and some convex surfaces. Kits quickly attach to your Hougen Magnetic Drill and positive non-slip positioning assures centered hole location.
Vac-Pad works exclusively with the Model HMD900 on non-ferrous materials, diamond plate and materials with surface imperfections up to 3mm deep. Standard shop air provides 761 lbf surface holding power at 85kpa. Safety switch shuts off drill motor if air pressure drops.
Part No. 05000
RotaMagic™ Super Concentrated Cutting Fluid
RotaMagic™ Super Concentrated Cutting Fluid is water soluble, biodegradable cutting lubricant that yields a 10:1 ratio when mixed with water. RotaMagic extends tool life and improves cutter performance.
RotaGel Cutting Lube is an extremely environmentally friendly lubricant for all types of metals and metal working applications. The blue colored gel assures thorough coverage and provides long lasting superior lubrication. Use with annular cutters, taps, drills, reamers, end mills, & more.
Part No.
Description
11748-10
Case of 10 Tubes
RotaFoam™ Cutting Fluid
RotaFoam Cutting Fluid is an extremely heavy-duty, high performance foamy lubricant for all types of metals and metal working applications. "Super Sticky" properties make the foam adhere to the metal and stay on longer. The blue colored foam allows you to "See Where You Spray" and also assures thorough coverage. Use with annular cutters, taps, drills, reamers, end mills, & more. (Only Available in the US & Canada)
Part No.
Description
11747-12
Case of 12 cans
Slick-Stik™Lubricant is softer than other stick lubricants for easy application, providing superior adhesion to the tool, assuring thorough coverage. Use with ferrous and non-ferrous materials. Can be used with all Hougen cutters including "12,000-Series" Cutters for horizontal or overhead drilling.
GS-21F-035CA 
