Electro-Hydraulic Hole Punches

Quickly punch round and oblong holes in steel. Save time and money with
Hougen-Ogura's self contained electric hole punchers.

Flat Bar	H-Steel	Angle	Channel

NEW - 76004PR - 40V Cordless	76000PR - 18V Cordless	75002.5PR
Weight 24.9 lbs (11.3 kg) Max Dia. 25/32" (20mm) Pressure (tons) 16.9 Material 3/8" (9.5mm) Throat Depth 1-9/16" (40mm) Speed 4 sec	Weight 17.4 lbs (7.9 kg) Max Dia. 19/32"* (15mm) Pressure (tons) 11 Material 1/4"** (6.35mm) Throat Depth .98" (25mm) Speed 4.5 sec	Weight 24.9 lbs (11.3 kg) Max Dia. 3/4"* (19mm) Pressure (tons) 10.1 Material 1/4"** (6.4mm) Throat Depth 2-3/8" (60mm) Speed 2.3 sec

75004PR	75006PR
Weight 24.9 lbs (11.3 kg) Max Dia. 25/32" (20mm) Pressure (tons) 16.9 Material 3/8" (9.5mm) Throat Depth 1-9/16" (40mm) Speed 2.5 sec	Weight 62.9 lbs (28.5 kg) Max Dia. 15/16"* (23.8mm) Pressure (tons) 26.9 Material 1/2"** (12.7mm) Throat Depth 1-31/32" (50mm) Speed 4 sec

* Hougen-Ogura Punches are designed for mild & structural steel, but can be used in other materials. Using in stainless or other materials significantly reduces the capacity. Consult Hougen Technical Support for questions about your particular application: (810) 635-7111

All four Hydraulic Hole Punchers are 100% self contained and operate off of electrical power. Their exclusive single body construction incorporates a high efficiency hydraulic pump in the punching head. There are no separate pumps or hoses to move or fittings to leak and maintain. Ogura/Punch-Pro's improved punch and die design requires less tonnage to punch, resulting in lighter weight units which result in less operator fatigue. Ogura/Punch-Pro's are fast to operate because they punch clean, accurate holes in as little as 2.3 seconds with the single pull of a trigger while an auto-return mechanism automatically returns the punching rod to the starting position. The punch can also easily be jogged down for accurate hole location. Punch round or oblong holes...round holes from 1/4" to 15/16" diameters and oblong holes 1/4" X 1/2" to 11/16" X 13/16" through up to 1/2" thick materials including Flat Bar, Channel, Angle and H-Beam.  * See Punch Chart for maximum thickness    ** See Punch Chart for maximum punch size Why Hougen-Ogura?