HMD130 Ultra Low Profile Magnetic Drill

Ultra Low Profile lightweight right angle
drill with large capacity.

• Lightweight at only 23.8 lbs (10.8kg)
• Patented quill feed arbor for smooth cuts
   and minimal maintenance
• Uses RotaLoc Plus™ annular cutters
which requires no tools for installation or removal
• Pilot light
• Positive slug ejection
• High torque gearing
• Lift detector safety system
• Feed handle switches easily from side
   to side
• Ratchet can be used in place of feed handle
• Rear mounted controls
• Carrying handle
• Carrying Case included
• Two year warranty

Specifications
Models
Cutters
Accessories
Video

HMD130 SPECIFICATIONS
Electrical System		115V, 50/60 Hz - 9A, 1035W 230V, 50/60 Hz - 4.5A, 1035W

Motor		8A (120V), 4A (240V) 450 RPM

Diameter		7/16"- 1-3/8" (12mm - 35mm)

Depth		1" (25mm)

Cutter/Mount		RotaLoc Plus™ Cutters with push & turn style shank

Dimensions		6-15/32" H x 6-3/4" W x 14-11/16" L (164mm H x 171mm W x 373mm L)

Magnet	Base	4" W x 9" L (102mm W x 229mm L)
	1" Plate (25mm)	Dead Lift 2165 lb. (982 kg)	Drillpoint Breakaway 735 lb. (333 kg)
	3/8" Plate (9.5mm)	1200 lb. (544 kg)	500 lb. (227 kg)

Weight		23.8 lb. (10.8 kg) • Shipping 31.7 lb (14.4 kg)

Shipping Dimensions		19.5 x 17 x 8" (49.5 x 43.1 x 22.9 cm)

Models & Part No.
Click on Part No for Op Manual

Part No.	Description	Voltage	CSA
0130101	HMD130	115V	X
0130201	HMD130	230V

* All drills include: carrying case, Slick-Stik™
lubricant, & safety strap.

RotaLoc Plus^TM Annular Cutters*

	For use in the HMD130 magnetic drill. They have a bayonet style twist lock shank for fast cutter changes without using tools. For optimum cutter tool life and cutter efficiency use Slick-Stik^TM or RotaGel^TM lubricant.

RotaLoc Plus™ Cutters for the HMD130
(M42 - Stack Cut Geometry
with 1" (25mm) Depth of Cut

Diameter (inches)	Part No.
7/16	17814**
1/2	17816
17/32	17817
9/16	17818
5/8	17820
11/16	17822
3/4	17824
13/16	17826
7/8	17828
15/16	17830
1	17832
1-1/16	17834
1-1/8	17836
1-3/16	17838
1-1/4	17840
1-5/16	17842
1-3/8	17844

** 7/16" is made from M2 HSS

Pilot

Part No.	Description
17810	Pilot

Diameter (mm)	Part No.
12mm	17900
13mm	17902
14mm	17904
15mm	17906
16mm	17908
17mm	17910
17.5mm	17911
18mm	17912
19mm	17914
20mm	17916
21mm	17918
22mm	17920
23mm	17922
24mm	17924
24.5mm	17925
25mm	17926
26mm	17928
26.5mm	17929
27mm	17930
28mm	17932
29mm	17934
30mm	17936
31mm	17938
32mm	17940
33mm	17942
34mm	17944
35mm	17946

RotaLoc Annular Cutter
RotaLoc™ Cutters*
for the HMD130
(M42 HSS- Stack-Cut Geometry
with 3/4" (19mm) Depth of Cut - Made in USA

Diameter (inches)	Part No.
1/2	17116
9/16	17118
5/8	17120
11/16	17122
3/4	17124
13/16	17126
7/8	17128
15/16	17130
1	17132
1-1/16	17134

Diameter (mm)	Part No.
12mm	17300
13mm	17302
14mm	17304
15mm	17306
16mm	17308
17mm	17310
18mm	17312
20mm	17316
22mm	17320
24mm	17324
26mm	17328

RotaLoc Carbide Tip Annular Cutter
RotaLoc™ Carbide Cutters*
for the HMD130
(Carbide Tip - Stack-Cut Geometry
with 3/4" (19mm) Depth of Cut

Diameter (inches)	Part No.
9/16	18-17118
5/8	18-17120
11/16	18-17122
3/4	18-17124
13/16	18-17126
7/8	18-17128
15/16	18-17130
1	18-17132
1-1/16	18-17134

Diameter (mm)	Part No.
14mm	18-17304
15mm	18-17306
16mm	18-17308
17mm	18-17310
18mm	18-17312
20mm	18-17316
22mm	18-17320
24mm	18-17324
26mm	18-17328

RotaLoc Plus™ Cutter Kits*

RotaLoc Plus cutter kits for the HMD130

Part No.	Description	D.O.C.
17802	Fabricator's Kit: Contains 1/2", 5/8", 3/4" Rotaloc Plus Cutters & 3 Pilots	1"
17803	Fabricator's Kit: Contains 9/16", 11/16", 13/16" Rotaloc Plus Cutters & 3 Pilots	1"
17805	Fabricator's Kit: Contains 14mm, 16mm, 18mm Rotaloc Plus Cutters & 3 Pilots	25mm
17808	Kit contains (14) cutters, 1" D.O.C. - 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-1/4 & 1-3/8" RotaLoc Plus cutters and two pilots (17810) in a sturdy plastic case	1"

WARNING: This product contains Cobalt, a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov

RotaGel™ Cutting Lube

RotaGel Cutting Lube is an extremely environmentally friendly lubricant for all types of metals and metal working applications. The blue colored gel assures thorough coverage and provides long lasting superior lubrication. Use with annular cutters, taps, drills, reamers, end mills, & more.

Part No.	Description
11748-10	Case of 10 Tubes

RotaFoam™ Cutting Fluid

RotaFoam Cutting Fluid is an extremely heavy-duty, high performance foamy lubricant for all types of metals and metal working applications. "Super Sticky" properties make the foam adhere to the metal and stay on longer. The blue colored foam allows you to "See Where You Spray" and also assures thorough coverage. Use with annular cutters, taps, drills, reamers, end mills, & more (Only Available in the US & Canada)

Part No.	Description
11747-12	Case of 12 cans

Hougen Slick-Stik is a wax based lubricant for use with annular cutters and other cutting tools

Slick-Stik™Lubricant is softer than other stick lubricants for easy application, providing superior adhesion to the tool, assuring thorough coverage. Use with ferrous and non-ferrous materials. Can be used with all Hougen cutters.

Slick-Stik™ Lube

Part No.	Description
11745-6	(6) 16 oz. Slick-Stik™ Lubricant
11746-12	(12) 1.68 oz. Mini Slick-Stik™ Lubricant

For SDS Information please click here