A powerful two speed power feed mag drill with great power to weight ratio.
• Large 2" x 2" capacity
• Powerful high torque Hougen motor and gears
• Two Speed gear box - 250 & 450 RPM
• Pilot light
• Smart technology optimizes feed rate for
increased tool life and excellent hole quality
• Single handle to engage power feed system
• Selectable manual/power feed mode
• Two stage magnet - 30% increase in power when
motor is turned on
• Positive slug ejection
• Integrated coolant bottle
• Lift detector safety system
• Two year warranty
Swivel Base adds even greater versatility: • Precisely line up your pilot with the holes
center location
• One stroke lock and unlock handle
• Great for horizontal, overhead, tight areas,
and getting out over another piece of steel
• Patented
Easily use twist drills with an HMD927. Drill chucks are quickly installed in place of the arbor. Spindle adapters are required to use a drill chuck.Must be used in manual mode.
Part No.
Description
10731
1/2" Hougen Chuck with key
10732
1/2" Jacobs Chuck with key
07930
Replacement key for 1/2" chucks
08186
Spindle Adapter for HMD927
Twist Drill Adapter
Easily installs in a Hougen Magnetic Drill* without removing drill arbor and coolant system. Adapter accepts a modified 118° twist drill with a 1/4" flatted shank that secures in adapter with a set screw.
A convenient kit is available containing all items listed below. Must be used in manual mode.
Tapping Kits
Lightweight, easy to install design incorporates a planetary gear reverse with a 1:1 ratio. Reversing speed is equal to spindle speed so in-feed and out-feed of the unit can be employed without reversing motor direction. Tapping Kits are not recommended for use with swivel base drills. Must be used in manual mode.
*When using a two speed drill always tap in low gear (250 RPM)
Drill Model
Part No.
Tap Cap. inches
Tapping Kit
Collet
HMD927
08177 (includes adapter 08176)
02495
#6 - 1/4"
02496
1/4" - 1/2"
Countersink Kit
Designed for use with Hougen Magnetic Drills, 82° Countersink is double fluted with carbide inserts
for maximum cutting action and long life. For holes from 9/16" to 15/16" diameters. Must be used in manual mode.
Part No.
Description
12965
82° Countersink Kit includes countersink with inserts & (4) Pilots - 9/16, 11/16, 13/16 & 15/16" plus a torx wrench
12966
82° Countersink with Carbide Inserts (Does not include pilots)
12960
9/16" diameter Pilot
12961
11/16" diameter Pilot
12962
13/16" diameter Pilot
12963
15/16" diameter Pilot
05464
Replacement Screw
05465
Replacement Wrench
05467
Replacement Carbide Inserts (Box of 10)
Use for mild steel, cast steel & malleable iron
05779
Replacement Carbide Inserts Wear Resistant (Box of 10) Use for structural steel, stainless steel, harder steels & non-ferrous materials
Pipe Adapter Kit
These kits let you drill pipe and tubing with a minimum 3" diameter and some convex surfaces. Kits quickly attach to your Hougen Magnetic Drill and positive non-slip positioning assures centered hole location. Must be used in manual mode.
* Minimum 3" diameter,
maximum 12" diameter
Part No.
Description
02564*
Chain mount for model HMD927
RotaMagic™ Super Concentrated Cutting Fluid
RotaMagic™ Super Concentrated Cutting Fluid is water soluble, biodegradable cutting lubricant that yields a 10:1 ratio when mixed with water. RotaMagic extends tool life and improves cutter performance.
Part No.
Description
11741*
1 Pint Bottle
11741-12
(12) 1 Pint Bottles
11742*
1 Gallon Bottle
11742-4
(4) 1 Gallon Bottles, makes 11 gallons each
11743
(1) 5 Gallon Pail, makes 55 gallons
11744
(1) 55 Gallon Drum, makes a lot of coolant!
* Individual Products Not for Distributor Purchase
RotaGel Cutting Lube is an extremely environmentally friendly lubricant for all types of metals and metal working applications. The blue colored gel assures thorough coverage and provides long lasting superior lubrication. Use with annular cutters, taps, drills, reamers, end mills, & more.
Part No.
Description
11748*
Single 8oz Tube
11748-10
Case of 10 Tubes
* Individual Tube Not for Distributor Purchase
RotaFoam™ Cutting Fluid
RotaFoam Cutting Fluid is an extremely heavy-duty, high performance foamy lubricant for all types of metals and metal working applications. "Super Sticky" properties make the foam adhere to the metal and stay on longer. The blue colored foam allows you to "See Where You Spray" and also assures thorough coverage. Use with annular cutters, taps, drills, reamers, endmills, & more. (Only Available in the US & Canada)
Part No.
Description
11747*
Single 17oz Can
11747-12
Case of 12 cans
* Individual Can Not for Distributor Purchase
Slick-Stik™Lubricant is softer than other stick lubricants for easy application, providing superior adhesion to the tool, assuring thorough coverage. Use with ferrous and non-ferrous materials. Can be used with all Hougen cutters including "12,000-Series" Cutters for horizontal or overhead drilling.
